moxa-cellular-utils (2.11.2) stretch; urgency=medium

  [Added]
  * support UC-3112-LX and UC-3122-LX models

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Thu, 17 Feb 2022 11:00:29 +0800

moxa-cellular-utils (2.11.1) stretch; urgency=medium

  [Changed]
  * only when module is connected, will trun on led

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Wed, 17 Nov 2021 09:53:11 +0800

moxa-cellular-utils (2.10.28) stretch; urgency=medium

  [Fixed]
  * fix ublox cat-M start network fail because check qmi_attach_status

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Tue, 30 Nov 2021 11:07:28 +0800

moxa-cellular-utils (2.10.27) stretch; urgency=medium

  [Fixed]
  * remove TMO/china_telecom carrier from ublox Ublox-SARA
  * show disconnected info when Ublox-SARA is detached
  * increase the delay because the Ublox-SARA-R4-R410M-02B module is ready late

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Wed, 17 Nov 2021 09:41:02 +0800

moxa-cellular-utils (2.10.26) stretch; urgency=medium

  [Chnaged]
  * using +CPIN instead of qmi command to get sim status for sierra

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Fri, 08 Oct 2021 12:34:31 +0800

moxa-cellular-utils (2.10.25) stretch; urgency=medium
  [Added]
  * added sim_status command retry mechanism for sierra

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Thu, 07 Oct 2021 14:18:23 +0800

moxa-cellular-utils (2.10.24) stretch; urgency=medium

  [Fixed]
    * check if connection is attched before starting the network

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Fri, 17 Sep 2021 18:29:50 +0800

moxa-cellular-utils (2.10.23) stretch; urgency=medium

  [Fixed]
    * fix telit gps_off return code
    * fix vzw connection fail when sim card no support IMS feature

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Mon, 16 Aug 2021 14:55:44 +0800

moxa-cellular-utils (2.10.22) stretch; urgency=medium

  [Added]
  * Add UC-8200 none wide temperature model support

 -- Remus Wu <remusty.wu@moxa.com>  Tue, 27 Jul 2021 08:02:24 +0800

moxa-cellular-utils (2.10.21) stretch; urgency=medium

  [Added]
    * Add CTO models support:
      - MPC-2120-T (CTO)
      - MPC-2101-CT-T (CTO)
      - MPC-2121-CT-T (CTO)

 -- Wayne Wei <WayneW.Wei@moxa.com>  Fri, 23 Jul 2021 11:31:24 +0800

moxa-cellular-utils (2.10.20) stretch; urgency=medium

  [Added]
    * Add CTO models support:
      - MC-1220-T-S (CTO)
      - V2201-T (CTO)
      - V2406C-T (CTO)
      - V2406C-CT-T (CTO)
      - V2403C-T (CTO)
      - V2403C-CT-T (CTO)
      - MPC-2070-T (CTO)

 -- Elvis Yao (姚家瑋) <ElvisCW.Yao@moxa.com>  Wed, 19 May 2021 11:31:24 +0800

moxa-cellular-utils (2.10.19) stretch; urgency=medium

  [Added]
    * Add V-2403C CT model support

  [Fixed]
    * Fix typo in V-2406C product config

 -- Elvis Yao (姚家瑋) <ElvisCW.Yao@moxa.com>  Mon, 19 Apr 2021 12:06:56 +0800

moxa-cellular-utils (2.10.18) stretch; urgency=medium

  [Changed]
   * Add new telit command on AT&T initialize to solve AT&T 3G nosupport in 2022

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Mon, 22 Mar 2021 15:47:57 +0800

moxa-cellular-utils (2.10.17) stretch; urgency=medium

  [Fixed]
    * Resetting default gateway when modem be default route for thingspro
    * Fix that turnoff gps function when key gps_on command consecutive
 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Mon, 22 Feb 2021 10:05:13 +0800

moxa-cellular-utils (2.10.16) stretch; urgency=medium

  [Fixed]
    * Align telit error code and error message

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Wed, 20 Jan 2021 15:48:42 +0800

moxa-cellular-utils (2.10.15) stretch; urgency=medium

  [Fixed]
    * Fix pin_retries function for Sierra MC7455/MC7430

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Tue, 22 Dec 2020 10:02:30 +0800

moxa-cellular-utils (2.10.14) stretch; urgency=medium

  [Fixed]
    * The uplink speed limit of gemalto module is reduced to 4.5 Mbps to avoid module crash issues.

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Tue, 15 Dec 2020 11:21:30 +0800

moxa-cellular-utils (2.10.13) stretch; urgency=medium

  [Added]
    * Add AIG-301 none wide temperature model support

 -- Remus Wu <remusty.wu@moxa.com>  Wed, 09 Dec 2020 15:49:12 +0800

moxa-cellular-utils (2.10.12) stretch; urgency=medium

  [Fixed]
    * Align imsi /sim_status retcode and error message for Quectel EC20

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Wed, 25 Nov 2020 16:07:37 +0800

moxa-cellular-utils (2.10.11) stretch; urgency=medium

  [Fixed]
    * Fix pin_retries function for Quectel EC20

  -- Pohung PH Chen <PohungPH.Chen@moxa.com>  Fri, 20 Nov 2020 15:00:00 +0800

moxa-cellular-utils (2.10.10) stretch; urgency=medium

  [Fixed]
    * Fix wrong attach_status for UC-2114-LX/UC-2116-LX
    * Fix switch/check carrier naming not matching for UC-2114-LX/UC-2116-LX
    * Fix location_info function for UC-2114-LX/UC-2116-LX
  [Changed]
    * Notification of pin_retries not supported for UC-2114-LX/UC-2116-LX
  [Removed]
    * Remove "auto" carrier option for UC-2114-LX/UC-2116-LX

 -- Kerry KR Weng <KerryKR.Weng@moxa.com>  Thu, 19 Nov 2020 14:45:36 +0800

moxa-cellular-utils (2.10.9) stretch; urgency=medium

  [Fixed]
    * Fix power on/off function for UC-2104-LX
    * Fix switch sim function for UC-2104-LX
  [Changed]
    * Control power directly for UC-2114-LX/UC-2116-LX

 -- Remus Wu <remusty.wu@moxa.com>  Mon, 16 Nov 2020 18:45:36 +0800

moxa-cellular-utils (2.10.8) stretch; urgency=medium

  [Changed]
    * Remove duplicate model name in AIG-501 config file (AIG-501-T-US-AZU-LX)

 -- Elvis Yao (姚家瑋) <ElvisCW.Yao@moxa.com>  Mon, 16 Nov 2020 11:10:34 +0800

moxa-cellular-utils (2.10.7) stretch; urgency=medium

   [Added]
    * Support AIG-501 series models:
      AIG-501-T-AZU-LX
      AIG-501-T-US-AZU-LX
      AIG-501-T-EU-AZU-LX
      AIG-501-T-AP-AZU-LX

 -- Elvis Yao (姚家瑋) <ElvisCW.Yao@moxa.com>  Thu, 12 Nov 2020 12:02:03 +0800

moxa-cellular-utils (2.10.6) stretch; urgency=medium

  [Changed]
    * Use 'mx-module-ctl' when conffile exist instead of 'mx-mod-ctl'

 -- Remus Wu <remusty.wu@moxa.com>  Mon, 02 Nov 2020 14:36:22 +0800

moxa-cellular-utils (2.10.5) stretch; urgency=medium

  * fix: uc2100-lx: remove non-support model
  * fix: uc2100-lx: rename model name to correct form
  * fix: uc2100-lx: update gpio control function

 -- Remus Wu <remusty.wu@moxa.com>  Wed, 28 Oct 2020 13:55:20 +0800

moxa-cellular-utils (2.10.4) stretch; urgency=medium

  * fix: fix wrong status from qmi wds

 -- Kerry KR Weng <KerryKR.Weng@moxa.com>  Mon, 26 Oct 2020 16:02:48 +0800

moxa-cellular-utils (2.10.3) stretch; urgency=medium

  * fix: update WCUM-8500 HW2.0 product configuration

 -- Alif Chen <alif.chen@moxa.com>  Wed, 21 Oct 2020 14:40:08 +0800

moxa-cellular-utils (2.10.2) stretch; urgency=medium

  * fix: remove debug message

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Tue, 13 Oct 2020 13:32:46 +0800

moxa-cellular-utils (2.10.1) stretch; urgency=medium

  * fix: fix special char to cause attach function fault

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Mon, 05 Oct 2020 16:07:48 +0800

moxa-cellular-utils (2.10.0) stretch; urgency=medium

  * fix: extend +cgact timeout base on ublox spec's definition to prevent timeout in seraching 3G network
  * feat: support previous power_off function to aviod data lose and module crash with hw power off

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Mon, 28 Sep 2020 12:02:53 +0800

moxa-cellular-utils (2.9.3) stretch; urgency=medium

  * fix: workaround for fist qmi command always timeout after telit module power_cycle

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Fri, 25 Sep 2020 18:17:08 +0800

moxa-cellular-utils (2.9.2) stretch; urgency=medium

  * fix: remove useless vzwauto function
  * fix: fix wrong SLOT id when using dhcp script

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Mon, 21 Sep 2020 10:48:50 +0800

moxa-cellular-utils (2.9.1) stretch; urgency=medium

  * fix: fix mc1200 syspath
  * fix: remove redundant LAC field

 -- Tzongyen Lin <tzongyen.lin@moxa.com>  Wed, 16 Sep 2020 10:08:37 +0800

moxa-cellular-utils (2.9.0) stretch; urgency=medium

  * fix: aig-301: remove unused model name
  * fix: aig-301: add model name
  * feat: add MC-1200 series configutation

 -- Remus Wu <remusty.wu@moxa.com>  Thu, 10 Sep 2020 11:22:09 +0800

moxa-cellular-utils (2.8.1) stretch; urgency=medium

  * fix: fix module_name description for Quectel EC20/EC25-AUX/EG25-G modules

 -- Pohung PH Chen <PohungPH.Chen@moxa.com>  Thu, 03 Sep 2020 15:00:01 +0800

moxa-cellular-utils (2.8.0) stretch; urgency=medium

  * feat: support logging on AT and QMI command

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Thu, 02 Jul 2020 17:08:41 +0800

moxa-cellular-utils (2.7.2) stretch; urgency=medium

  * fix: cell-signald: set variable to local

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Thu, 20 Aug 2020 10:27:18 +0800

moxa-cellular-utils (2.7.1) stretch; urgency=medium

  * fix: signal level information for Quectel EC20

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Fri, 14 Aug 2020 15:46:01 +0800

moxa-cellular-utils (2.7.0) stretch; urgency=medium

  * feat: support UC-3100 AP models

 -- Wes Huang <Wes.Huang@moxa.com>  Wed, 05 Aug 2020 03:34:00 -0400

moxa-cellular-utils (2.6.0) stretch; urgency=medium

  * feat: add support for UC-8580
  * feat: add support for UC-8540

 -- Alif Chen <alif.chen@moxa.com>  Mon, 03 Aug 2020 19:00:35 +0800

moxa-cellular-utils (2.5.3) stretch; urgency=medium

  * fix: access fw_printenv takes too long, cache the value instead
  * fix: adjust the signald interval to 60 secs
  * fix: align the output of tac and lac

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Wed, 29 Jul 2020 10:41:44 +0800

moxa-cellular-utils (2.5.2) stretch; urgency=medium

  * fix: keep interface from process IPV6 RA request

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Thu, 23 Jul 2020 10:45:48 +0800

moxa-cellular-utils (2.5.1) stretch; urgency=medium

  * fix: fix get IMSI for YUGA CLM920-NC5

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Fri, 17 Jul 2020 11:56:09 +0800

moxa-cellular-utils (2.5.0) stretch; urgency=medium

  * fix: show "NotSupport" if no value
  * feat: add support for Quectel EC20

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Tue, 14 Jul 2020 11:19:06 +0800

moxa-cellular-utils (2.4.3) stretch; urgency=medium

  * fix: aig-301: slot variable with braces could not be parsing

 -- Remus Wu <remusty.wu@moxa.com>  Mon, 13 Jul 2020 19:27:19 +0800

moxa-cellular-utils (2.4.2) stretch; urgency=medium

  * fix: only toggle ipcp_req in DOCOMO Japan
  * fix: enable ipcp_req by default
  * fix: fail to connect in vzw network on L201-02S-01

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Wed, 24 Jun 2020 13:14:33 +0800

moxa-cellular-utils (2.4.1) stretch; urgency=medium

  * fix: aig-301: correct product function name

 -- Remus Wu <remusty.wu@moxa.com>  Wed, 08 Jul 2020 14:20:26 +0800

moxa-cellular-utils (2.4.0) stretch; urgency=medium

  * feat: update product aig-301 series

 -- Remus Wu <remusty.wu@moxa.com>  Wed, 08 Jul 2020 10:31:28 +0800

moxa-cellular-utils (2.3.0) stretch; urgency=medium

  * feat: add product aig-300 series

 -- Remus Wu <remusty.wu@moxa.com>  Wed, 01 Jul 2020 11:13:46 +0800

moxa-cellular-utils (2.2.2) stretch; urgency=medium

  * fix: config mtu for L201
  * fix: handle empty signal

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Wed, 24 Jun 2020 16:25:04 +0800

moxa-cellular-utils (2.2.1) stretch; urgency=medium

  * fix: fix version

 -- Tzongyen Lin <Tzongyen.Lin@moxa.com>  Tue, 23 Jun 2020 18:05:43 +0800

moxa-cellular-utils (2.2.0) stretch; urgency=medium

  * feat: support Telit LE910C1/C4 AP/EU modules

 -- Tzongyen Lin <Tzongyen.Lin@moxa.com>  Wed, 10 Jun 2020 18:07:29 +0800

moxa-cellular-utils (2.1.10) stretch; urgency=medium

  * fix: update V-2406C product name for V2406C-KL*-CT-T

 -- Elvis Yao (姚家瑋) <ElvisCW.Yao@moxa.com>  Tue, 09 Jun 2020 14:12:52 +0800

moxa-cellular-utils (2.1.9) stretch; urgency=medium

  * fix: give enough time for +UMNOCONF to complete

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Mon, 01 Jun 2020 18:37:46 +0800

moxa-cellular-utils (2.1.8) stretch; urgency=medium

  * fix: hide confusing error message on TOBY L2 initial porcess

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Mon, 04 May 2020 19:37:36 +0800

moxa-cellular-utils (2.1.7) stretch; urgency=medium

  * fix: use netmask from cgcontrdp rather than uipaddr

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Mon, 27 Apr 2020 19:14:38 +0800

moxa-cellular-utils (2.1.6) stretch; urgency=medium

  * fix: align the connection status of qmi based module

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Mon, 06 Apr 2020 11:35:46 +0800

moxa-cellular-utils (2.1.5) stretch; urgency=medium

  * fix: V-2201: Support both debian 8 and 9

 -- Remus Wu <remusty.wu@moxa.com>  Mon, 30 Mar 2020 16:38:53 +0800

moxa-cellular-utils (2.1.4) stretch; urgency=medium

  * fix: unable to attach to Verizon in LE910C1-NF

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Fri, 27 Mar 2020 18:46:32 +0800

moxa-cellular-utils (2.1.3) stretch; urgency=medium

  * fix: add alternative method for iccid, imsi and pin-retries in WP76xx

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Wed, 25 Mar 2020 17:50:56 +0800

moxa-cellular-utils (2.1.2) stretch; urgency=medium

  * fix: apply mtu setting when invoking udhcpc

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Tue, 24 Mar 2020 14:01:47 +0800

moxa-cellular-utils (2.1.1) stretch; urgency=medium

  * add: add support for Sierra WP7609

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Mon, 23 Mar 2020 10:22:14 +0800

moxa-cellular-utils (2.1.0) stretch; urgency=medium

  * feat: add v2403c series config
  * fix: remove sierra WP76xx module DHCP RELAY settings when module init

 -- Elvis Yao (姚家瑋) <ElvisCW.Yao@moxa.com>  Thu, 12 Mar 2020 11:12:16 +0800

moxa-cellular-utils (2.0.11) stretch; urgency=medium

  * fix: remove TMO in LE910C1NF

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Fri, 06 Mar 2020 10:54:47 +0800

moxa-cellular-utils (2.0.10) stretch; urgency=medium

  * fix: Align the set_profile logic for R410M with L2 series
  * fix: use CEREG to judge the attach status of PS for R410M

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Mon, 03 Feb 2020 11:38:49 +0800

moxa-cellular-utils (2.0.9) stretch; urgency=medium

  * fix: Gemalto ELS61 needs a manually switch to automatically search mode

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Tue, 07 Jan 2020 10:48:45 +0800

moxa-cellular-utils (2.0.8) stretch; urgency=medium

  * fix: gemalto ELS61 might fail to leave the flight mode

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Fri, 27 Dec 2019 13:56:53 +0800

moxa-cellular-utils (2.0.7) stretch; urgency=medium

  * feat: add force operation
  * fix: correct the judgement of the SIM status via QMI way
  * fix: global lock checking is not needed in cell_at_cmd

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Fri, 29 Nov 2019 14:37:25 +0800

moxa-cellular-utils (2.0.6) stretch; urgency=medium

  * fix: UC-8410A: Supports both debian 8 and 9(MIL)

 -- Alif Chen <alif.chen@moxa.com>  Thu, 28 Nov 2019 16:03:52 +0800

moxa-cellular-utils (2.0.5) stretch; urgency=medium

  * fix: add moxa-module-control support to V2406C product config

 -- Elvis Yao (姚家瑋) <ElvisCW.Yao@moxa.com>  Wed, 30 Oct 2019 15:52:31 +0800

moxa-cellular-utils (2.0.4) stretch; urgency=medium

  * fix: ublox: wait module back when switch carrier in L201

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Wed, 30 Oct 2019 10:58:18 +0800

moxa-cellular-utils (2.0.3) stretch; urgency=medium

  * fix: correct the set_profile for TOBY L2 series
  * fix: increase the timeout value for flight mode switching

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Thu, 24 Oct 2019 13:32:32 +0800

moxa-cellular-utils (2.0.2) stretch; urgency=medium

  *  fix: modify the usage
  *  fix: correct the judgement in cellular status for TOBY L2

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Tue, 22 Oct 2019 16:37:30 +0800

moxa-cellular-utils (2.0.1) stretch; urgency=medium

  * fix: make the status output more reliable in Toby L2 series

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Wed, 16 Oct 2019 14:33:28 +0800

moxa-cellular-utils (2.0.0) stretch; urgency=medium

  * fix: add static route for netmask 32
  * change the default signal ouput format in cell_mgmt
  * feat: apply new signal format for cell-signald
  * change signal output for gemalto modules
  * change signal output for huawei 909s-821
  * change signal output for tellit module LE910C1 series
  * change signal output for modules via QMI protocol
  * feat: add signal_adv for toby R410M
  * Add package bc as dependencies
  * fix: correct the attach info for toby L2 series
  * fix: correct the service info for toby L2 series
  * feat: add signal_adv for toby L2 series

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Wed, 02 Oct 2019 19:00:42 +0800

moxa-cellular-utils (1.55.8) stretch; urgency=medium

  * refactor: MC-7455/MC-7430 cell_mgmt <OPTIONS> check_carrier shows available carriers from ${CARRIER} instead of at!priid?
  * docs: Add usage "Default=1" in the section "set_flight_mode"

 -- Alif Chen <alif.chen@moxa.com>  Fri, 27 Sep 2019 14:23:01 +0800

moxa-cellular-utils (1.55.7) stretch; urgency=medium

  * fix: usage after switch wrong carrier

 -- Alif Chen <alif.chen@moxa.com>  Wed, 25 Sep 2019 11:57:41 +0800

moxa-cellular-utils (1.55.6) stretch; urgency=medium

  * fix(sierra): add WP7607/WP7610 switch carrier support

 -- Elvis Yao (姚家瑋) <ElvisCW.Yao@moxa.com>  Tue, 24 Sep 2019 20:02:56 +0800

moxa-cellular-utils (1.55.5) stretch; urgency=medium

  * fix: Write correct information ex. APN1, APN2... to profile

 -- Alif Chen <alif.chen@moxa.com>  Mon, 23 Sep 2019 16:27:17 +0800

moxa-cellular-utils (1.55.4) unstable; urgency=medium

  * fix: for fixing some parsing error

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Wed, 18 Sep 2019 19:08:43 +0800

moxa-cellular-utils (1.55.3) stretch; urgency=medium

  * fix: support location info for TOBY L2 series
  * fix: no response from subsequent AT after stop_network in Tboy L2
  * fix: refine the verizon network starting flow
  * fix: verizon static SIM connection in TOBY L2 series

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Thu, 05 Sep 2019 23:11:26 +0800

moxa-cellular-utils (1.55.2) stretch; urgency=medium

  * fix(ublox): stop network by flush ip address instead of dhclient-script
  * fix: forbid cell_mgmt starts twice without stop in TOBY L2
  * fix: support u-blox L2 MPCI series in carrier switch
  * fix: restrict the check_carrier for L201 only

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Mon, 02 Sep 2019 18:54:40 +0800

moxa-cellular-utils (1.55.1) stretch; urgency=medium

  * fix: filter out the improper signal value

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Tue, 27 Aug 2019 19:10:26 +0800

moxa-cellular-utils (1.55.0) stretch; urgency=medium

  * refactor: extract switch_carrier from main usage manual to _cell_usage_switch_carrier function
  * feat: support Telit LE910C1-NF switch and check carrier features
  * fix: add ublox L2 and SARA-R4 series carrier information
  * fix: use _cell_usage_switch_carrier instead of orig usage message in ublox.conf

 -- Wes Huang <Wes.Huang@moxa.com>  Tue, 27 Aug 2019 16:36:08 +0800

moxa-cellular-utils (1.54.1) unstable; urgency=medium

  * fix: correct the output carrier list for ublox module

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Tue, 27 Aug 2019 13:22:42 +0800

moxa-cellular-utils (1.54.0) unstable; urgency=medium

  * fix: align the output of the check_carrier
  * fix: use RSRP as signal indication from QMI protocol
  * fix: align syntax in cell-signald
  * fix: restore the original IFS value
  * feat: Use LTE RSRP as the output signal for TOBY L2 series
  * feat: Support multiple threshold level for both LTE_RSRP and UMTS_RSSI
  * fix(ublox): stop network by deregister and auto-register from network

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Mon, 26 Aug 2019 19:51:32 +0800

moxa-cellular-utils (1.53.3) unstable; urgency=medium

  * Ublox toby-l2
    * fix: stop network by dhclient-script
    * fix: remove setup bridge mode when initialize module
    * fix: needs to specify the cid parameter when stop network

 -- Elvis Yao (姚家瑋) <ElvisCW.Yao@moxa.com>  Fri, 23 Aug 2019 13:52:29 +0800

moxa-cellular-utils (1.53.2) unstable; urgency=medium

  * Ublox toby-l2
    * fix: use bridge mode by default with ublox toby-l2
    * fix: initialize fail but shows success

 -- Aeluin Chen <aeluin.chen@moxa.com>  Fri, 02 Aug 2019 18:06:03 +0800

moxa-cellular-utils (1.53.1) unstable; urgency=medium

  * fix: correct the u-blox R410M service representation
  * fix: initial the ALL_INTERFACE for R410M
  * fix: disable PSM in SARA-R410M

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Thu, 22 Aug 2019 14:34:44 +0800

moxa-cellular-utils (1.53.0) unstable; urgency=medium

  * fix: force gsmMuxd to terminate when power_off module R410M
  * fix: replace the starting white spaces with tab in ublox.conf
  * fix: adjust the flow of switching carrier for R410M
  * feat: Support more carrier profiles for R410M
  * fix: CATM1 is change to be indicated by 7

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Thu, 18 Jul 2019 18:56:41 +0800

moxa-cellular-utils (1.52.11) unstable; urgency=medium

  * fix: modify the usage information

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Tue, 02 Jul 2019 13:24:37 +0800

moxa-cellular-utils (1.52.10) unstable; urgency=medium

  * fix: accessing ICCID by qmi is not supported in YUGA CLM920 NC5

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Tue, 25 Jun 2019 16:10:01 +0800

moxa-cellular-utils (1.52.9) unstable; urgency=medium

  * fix: send AT command too early will failed
  * fix: fix error in signald when no signal detected

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Mon, 17 Jun 2019 10:55:51 +0800

moxa-cellular-utils (1.52.8) unstable; urgency=medium

  * fix: use qmi to get signal for Telit LE910C1

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Thu, 30 May 2019 15:51:36 +0800

moxa-cellular-utils (1.52.7) unstable; urgency=medium

  * fix: don't immediately return after set flight mode fail

 -- Donald Hsu <donald.hsu@moxa.com>  Wed, 29 May 2019 16:41:28 +0800

moxa-cellular-utils (1.52.6) unstable; urgency=medium

  * fix: update UC8200 product configuration

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Tue, 28 May 2019 20:34:41 +0800

moxa-cellular-utils (1.52.5) unstable; urgency=medium

  * fix: cell_modules returns error if no module exists in signald, fix it to zero

 -- Alif Chen <alif.chen@moxa.com>  Tue, 14 May 2019 18:31:40 +0800

moxa-cellular-utils (1.52.4) unstable; urgency=medium

  * fix: set interface down after qmi stop network

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Mon, 13 May 2019 13:36:51 +0800

moxa-cellular-utils (1.52.3) unstable; urgency=medium

  * fix: cell_mgmt version not showed

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Thu, 02 May 2019 14:00:54 +0800

moxa-cellular-utils (1.52.2) unstable; urgency=medium

  * fix: update uc8580.conf of signal led control function

 -- Alif Chen <alif.chen@moxa.com>  Thu, 02 May 2019 14:25:55 +0800

moxa-cellular-utils (1.52.1) unstable; urgency=medium

  * fix: update v2406c.conf

 -- Elvis Yao <ElvisCW.Yao@moxa.com>  Tue, 02 Apr 2019 18:32:07 +0800

moxa-cellular-utils (1.52.0) unstable; urgency=medium

  * feat: add v2406c series config

 -- Elvis Yao <ElvisCW.Yao@moxa.com>  Mon, 01 Apr 2019 17:37:22 +0800

moxa-cellular-utils (1.51.3) unstable; urgency=medium

  * fix: error of variable expansion in single quote
  * fix: don't immediately return after set profile fail

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Wed, 27 Mar 2019 19:14:58 +0800

moxa-cellular-utils (1.51.2) unstable; urgency=medium

  * fix: qmi transaction timeout under some circumstances

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Wed, 27 Mar 2019 10:22:43 +0800

moxa-cellular-utils (1.51.1) unstable; urgency=medium

  * fix: update uc3100-lx.conf
  * fix: update uc5100-lx.conf

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Tue, 26 Mar 2019 18:14:16 +0800

moxa-cellular-utils (1.51.0) unstable; urgency=medium

  * fix: at command with `$` failed
  * fix(telit): GPS setting reset after module power-cycle
  * feat: support module power-cycle hook

 -- Aeluin Chen <aeluin.chen@aeluin.chen-PC>  Tue, 12 Mar 2019 16:46:18 +0800

moxa-cellular-utils (1.50.1) unstable; urgency=medium

  * fix: move udhcpc script from /var/run to /etc/moxa-cellular-utils/udhcpc

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Tue, 05 Mar 2019 18:10:20 +0800

moxa-cellular-utils (1.50.0) unstable; urgency=medium

  * fix(huawei): syntax error
  * feat: add product mpc-2121
  * fix: `poff` only if started by `ppp`
  * fix: double check status by pid file

 -- Aeluin Chen <aeluin.chen@moxa.com>  Tue, 26 Feb 2019 12:38:00 +0800

moxa-cellular-utils (1.49.0) unstable; urgency=medium

  * feat: add uc8200 series config

 -- Harry YJ Jhou <HarryYJ.Jhou@moxa.com>  Wed, 20 Feb 2019 10:29:10 +0800

moxa-cellular-utils (1.48.0) unstable; urgency=medium

  * fix: reset pin typo error
  * feat: use mx-module-ctl instead of mx-mod-ctl on UC-8200 & UC-5100 series

 -- Harry YJ Jhou <HarryYJ.Jhou@moxa.com>  Fri, 15 Feb 2019 16:28:33 +0800

moxa-cellular-utils (1.47.0) unstable; urgency=medium

  * fix: adjsut the output of check_carrier for R410M
  * fix: modify the APN setting flow for R410M
  * feat: support set_profile for R410M
  * refactor: extract gsmMuxd from initialization of R410M
  * feat: support carrier switch for R410M 02B
  * Merge branch 'develop' into 'develop'

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Mon, 28 Jan 2019 16:14:43 +0800

moxa-cellular-utils (1.46.0) unstable; urgency=medium

  * feat: use mx-module-ctl instead of mx-mod-ctl on UC-3100 series

 -- Wes Huang <Wes.Huang@moxa.com>  Thu, 17 Jan 2019 16:57:02 +0800

moxa-cellular-utils (1.45.1) unstable; urgency=medium

  * fix: unexpected reset on Sierra Wireless MC74xx

 -- Aeluin Chen <aeluin.chen@moxa.com>  Fri, 14 Dec 2018 11:42:34 +0800

moxa-cellular-utils (1.45.0) unstable; urgency=medium

  * feat: add product uc8200

 -- Harry YJ Jhou <HarryYJ.Jhou@moxa.com>  Thu, 13 Dec 2018 15:57:40 +0800

moxa-cellular-utils (1.44.4) unstable; urgency=medium

  * fix: ignore failure message in R410M
  * fix: add gps port detection in module R410M
  * fix: correct the pattern to detect the attach status for R410M

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Tue, 11 Dec 2018 18:45:22 +0800

moxa-cellular-utils (1.44.3) unstable; urgency=medium

  * fix: fix bug for Gemalto ELS61 wvdial template
  * fix: use IP instead of IPV4V6 for ppp

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Fri, 7 Dec 2018 18:52:34 +0800

moxa-cellular-utils (1.44.2) unstable; urgency=medium

  * feat: use mx-module-ctl for UC-5100 series

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Fri, 30 Nov 2018 10:50:15 +0800

moxa-cellular-utils (1.44.1) unstable; urgency=medium

  * fix: add usage info when carrier switch failed in ublox.conf
  * fix: update model name in uc8100a-me config due to the SRS change

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Thu, 22 Nov 2018 17:37:35 +0800

moxa-cellular-utils (1.44.0) unstable; urgency=medium

  * fix: update the LED control in UC8100A-ME
  * fix: use silent reboot for carrier switching rather than power_cycle
  * fix: make proper initialization for the USB HUB in ublox module
  * fix: add power_cycle after switching carrier for TOBY L2 L201
  * feat: support check carrier for TOBY L2 L201
  * feat: support to switch carrier for TOBY L2 L201
  * fix: add status function for ublox hub
  * feat: add product uc8100a-me

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Mon, 19 Nov 2018 17:49:59 +0800

moxa-cellular-utils (1.43.1) unstable; urgency=medium

  * fix: don't use variable name starts with "Op" in set_operator function
  * fix: modify the code to a more straight-foward style
  * fix: fix bug when the value of variable "Auto" is empty

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Mon, 19 Nov 2018 10:18:33 +0800

moxa-cellular-utils (1.43.0) unstable; urgency=medium

  * feat: support module Telit LE910C1-NS/NF

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Thu, 15 Nov 2018 11:58:42 +0800

moxa-cellular-utils (1.42.1) unstable; urgency=medium

  * fix: use "mx-led-ctl" instead of hardcode

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Thu, 1 Nov 2018 14:49:04 +0800

moxa-cellular-utils (1.42.0) unstable; urgency=medium

  * Gemalto ELS61
    * feat: support `OpPreferredRadioType`

 -- Moxa <moxa@aeluin.chen-PC>  Mon, 29 Oct 2018 17:54:38 +0800

moxa-cellular-utils (1.41.0) unstable; urgency=medium

  * Gemalto ELS61
    * fix: fail to set username & password
    * feat: support `find_operators` and `set_operator`
  * fix: parameter with space was truncated

 -- Aeluin Chen <aeluin.chen@moxa.com>  Tue, 23 Oct 2018 11:49:40 +0800

moxa-cellular-utils (1.40.3) unstable; urgency=medium

  * Gemalto ELS61
    * fix: connection failed
    * feat: support `signal_adv`
    * fix: authentication
  * fix: typo (dbm => dBm)

 -- Aeluin Chen <aeluin.chen@moxa.com>  Fri, 21 Sep 2018 18:58:23 +0800

moxa-cellular-utils (1.40.2) unstable; urgency=medium

  * fix: check the existence of the gsmMuxd before peroforming the
    retry mechanism
  * fix: reattach to the base station to make the PPP connection more stable

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Mon, 22 Oct 2018 10:31:27 +0800

moxa-cellular-utils (1.40.1) unstable; urgency=medium

  * fix: change signal strength from 30 to 31
  * fix: force to kill gsmMuxd if it is hanging

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Tue, 09 Oct 2018 16:58:23 +0800

moxa-cellular-utils (1.40.0) unstable; urgency=medium

  * feat: support module Telit LE910-V2

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Thu, 27 Sep 2018 18:32:11 +0800

moxa-cellular-utils (1.39.3) unstable; urgency=medium

  * fix: adjust the hub init flow of ublox module

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Fri, 07 Sep 2018 14:12:38 +0800

moxa-cellular-utils (1.39.2) unstable; urgency=medium

  * fix: GPS off after `power_cycle`

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 06 Sep 2018 16:54:42 +0800

moxa-cellular-utils (1.39.1) stretch; urgency=medium

  * fix: adjust the wvdial setting for ublox-R410M-02B

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Thu, 06 Sep 2018 11:29:44 +0800

moxa-cellular-utils (1.39.0) unstable; urgency=low

  * feat: add uc8540 signald configuration
  * fix: fix variable be covered issue

 -- Donald Hsu <donald.hsu@moxa.com>  Thu, 06 Sep 2018 07:55:27 +0800

moxa-cellular-utils (1.38.4) unstable; urgency=medium

  * fix: support original carrier name

 -- Moxa <moxa@aeluin.chen-PC>  Sun, 02 Sep 2018 14:38:21 +0800

moxa-cellular-utils (1.38.3) unstable; urgency=medium

  * fix: update sim slot for uc8540

 -- Donald Hsu <donald.hsu@moxa.com>  Fri, 31 Aug 2018 09:35:49 +0800

moxa-cellular-utils (1.38.2) unstable; urgency=medium

  * fix: return "0" when no module exist

 -- Moxa <moxa@aeluin.chen-PC>  Mon, 20 Aug 2018 15:30:54 +0800

moxa-cellular-utils (1.38.1) stretch; urgency=medium

  * fix: set the correct behavior of cellular LTE ON pin

 -- Wes Huang <Wes.Huang@moxa.com>  Wed, 08 Aug 2018 10:14:22 +0800

moxa-cellular-utils (1.38.0) stretch; urgency=medium

  * feat: support ELS31-V module to disable thermal shutdown feature

 -- Wes Huang <Wes.Huang@moxa.com>  Tue, 07 Aug 2018 18:42:50 +0800

moxa-cellular-utils (1.37.3) unstable; urgency=medium

  * fix: run for `all` should not return fail code

 -- Aeluin Chen <aeluin.chen@moxa.com>  Tue, 07 Aug 2018 16:57:05 +0800

moxa-cellular-utils (1.37.2) stretch; urgency=medium

  * fix: kill the gsm tool if its pid existing

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Tue, 07 Aug 2018 13:30:58 +0800

moxa-cellular-utils (1.37.1) stretch; urgency=medium

  * fix: check the existence of gsmMuxd

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Wed, 01 Aug 2018 07:54:39 +0800

moxa-cellular-utils (1.37.0) stretch; urgency=medium

  * feat: support products UC2114 and UC2116
  * feat: support module Ublox SARA R4 R410M 02B
  * fix: correct the description of uc2100-lx.conf
  * fix: remove the redundant part in uc2100-lx.conf
  * feat: add SWITCH_SIM_FUNC in uc2100-lx.conf for model uc2114/16
  * fix: kill the gsmmuxd before the power off for better operation of the MUX mode
  * fix: use the symbolic node mux0 and mux1 as AT command port instead of pts/0 and pts/1 which may change due to other pts node

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Mon, 30 Jul 2018 19:15:54 +0800

moxa-cellular-utils (1.36.3) unstable; urgency=medium

  * fix: some command return wrong status when error occurred
  * fix: cannot `power-cycle` while no module exist

 -- Aeluin Chen <aeluin.chen@moxa.com>  Tue, 31 Jul 2018 16:22:38 +0800

moxa-cellular-utils (1.36.2) unstable; urgency=medium

  * fix: fix typo, "preffered" => "preferred"
  * feat: provide supported carriers
  * docs: fix typo, "not support" => "not supported"

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 26 Jul 2018 18:39:16 +0800

moxa-cellular-utils (1.36.1) unstable; urgency=medium

  * fix: always show "Error: Couldn't get packet service status." when no
    module exist
  * fix: `power_cycle` fail when no module exist
  * fix: block forever when power with empty slot

 -- Aeluin Chen <aeluin.chen@moxa.com>  Mon, 09 Jul 2018 17:15:43 +0800

moxa-cellular-utils (1.36.0) unstable; urgency=low

  * feat: support module Sierra Wireless WP7504

 -- Aeluin Chen <aeluin.chen@moxa.com>  Fri, 29 Jun 2018 14:53:44 +0800

moxa-cellular-utils (1.35.0) stretch; urgency=medium

  * feat: add new ublox usb hub

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Mon, 25 Jun 2018 10:17:14 +0800

moxa-cellular-utils (1.34.0) stretch; urgency=medium

  * feat: support models UC2114 and UC2116

 -- Fero JD Zhou <FeroJD.Zhou@moxa.com>  Fri, 22 Jun 2018 20:17:14 +0800

moxa-cellular-utils (1.33.0) stretch; urgency=medium

  * feat: support uc8100 series all models.

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Fri, 22 Jun 2018 17:19:29 +0800

moxa-cellular-utils (1.32.0) stretch; urgency=medium

  * feat: support uc3100 series T models.

 -- Wes Huang <Wes.Huang@moxa.com>  Mon, 11 Jun 2018 10:47:00 +0800

moxa-cellular-utils (1.31.4) unstable; urgency=medium

  * fix: module cannot be power on when status is off
  * fix: no status info. when connect with `udhcpc`

 -- Aeluin Chen <aeluin.chen@moxa.com>  Tue, 22 May 2018 14:20:13 +0800

moxa-cellular-utils (1.31.3) stretch; urgency=medium

  * feat: add uc2100 series signald configuration

 -- Wes Huang <Wes.Huang@moxa.com>  Mon, 14 May 2018 17:46:54 +0800

moxa-cellular-utils (1.31.2) unstable; urgency=medium

  * fix: disable thermal shutdown for Gemalto ELS61

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 10 May 2018 14:40:38 +0800

moxa-cellular-utils (1.31.1) unstable; urgency=medium

  * fix: adjust for ublox LARA-R2 series

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Thu, 26 Apr 2018 17:28:19 +0800

moxa-cellular-utils (1.31.0) unstable; urgency=low

  * feat: Support UC-8410A-LX version 3.0

 -- Harry YJ Jhou <HarryYJ.Jhou@moxa.com>  Tue, 24 Apr 2018 14:04:08 +0800

moxa-cellular-utils (1.30.0) unstable; urgency=low

  * feat: Support ublox TOBY-L201/210

 -- Moxa <moxa@aeluin.chen-PC>  Mon, 23 Apr 2018 16:20:08 +0800

moxa-cellular-utils (1.29.2) unstable; urgency=medium

  * fix: IP type for Gemalto modules (ELS31/61)

 -- Aeluin Chen <aeluin.chen@moxa.com>  Tue, 17 Apr 2018 14:45:21 +0800

moxa-cellular-utils (1.29.1) unstable; urgency=medium

  * fix: `service` no response for Gemalto ELS61

 -- Aeluin Chen <aeluin.chen@moxa.com>  Tue, 17 Apr 2018 12:25:42 +0800

moxa-cellular-utils (1.29.0) unstable; urgency=medium

  * feat: support uc8100me series signald
  * feat: support uc8100 series signald
  * feat: support l3150 series signald

 -- Taiyi Wu <TaiyiTY.Wu@moxa.com>  Thu, 12 Apr 2018 09:42:19 +0800

moxa-cellular-utils (1.28.1) unstable; urgency=medium

  * fix: fix if-down hook for ppp

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Wed, 11 Apr 2018 19:17:18 +0800

moxa-cellular-utils (1.28.0) unstable; urgency=medium

  * fix: cell-signald support read product config to signal led
  * feat: update uc5100.conf for signal led functions
  * feat: support uc3100 series signal
  * fix: cell-signald shall return when operation is not support

 -- Elvis Yao (姚家瑋) <ElvisCW.Yao@moxa.com>  Tue, 03 Apr 2018 17:36:42 +0800

moxa-cellular-utils (1.27.8) unstable; urgency=medium

  * fix: ublox module connect to 4G signal

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Mon, 2 Apr 2018 10:56:44 +0800

moxa-cellular-utils (1.27.7) unstable; urgency=medium

  * fix: check folder exist before find command in sierra check_fw

 -- Taiyi Wu <TaiyiTY.Wu@moxa.com>  Thu, 29 Mar 2018 11:01:59 +0800

moxa-cellular-utils (1.27.6) unstable; urgency=low

  * fix: wait until successfully extract GPS, AT port for ublox module
  * fix: don't return on AT command error in `attach_status` command
  * fix: fix error message

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Wed, 28 Mar 2018 13:52:00 +0800

moxa-cellular-utils (1.27.5) unstable; urgency=low

  * fix: fix `status` command output message for ppp

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Tue, 27 Mar 2018 18:06:27 +0800

moxa-cellular-utils (1.27.4) unstable; urgency=low

  * feat: support L3150 series

 -- Taiyi Wu <TaiyiTY.Wu@moxa.com>  Mon, 26 Mar 2018 18:15:28 +0800

moxa-cellular-utils (1.27.3) unstable; urgency=low

  * fix: also remove STATUS_FILE when clearing state

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Mon, 26 Mar 2018 16:50:29 +0800

moxa-cellular-utils (1.27.2) unstable; urgency=low

  * fix: unlock PIN with double quote for u-blox module

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Tue, 20 Mar 2018 10:58:55 +0800

moxa-cellular-utils (1.27.1) unstable; urgency=medium

  * fix: driver need time to initialize.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Mon, 19 Mar 2018 17:59:46 +0800

moxa-cellular-utils (1.27.0) unstable; urgency=low

  * feat: support u-blox LARA-R280 module

 -- Ken CJ Chou <KenCJ.Chou@moxa.com>  Sun, 18 Mar 2018 15:02:24 +0800

moxa-cellular-utils (1.26.0) unstable; urgency=low

  * feat: support UC-8540

 -- Donald Hsu <donald.hsu@moxa.com>  Tue, 13 Mar 2018 17:40:15 +0800

moxa-cellular-utils (1.25.1) unstable; urgency=medium

  * feat: provide reserved AT port list.
  * fix: `dhclient` no function.

 -- Moxa <moxa@aeluin.chen-PC>  Tue, 13 Mar 2018 16:26:10 +0800

moxa-cellular-utils (1.25.0) unstable; urgency=medium

  * fix: add timeout to prevent open() blocked issue.
  * feat: `set_apn` is able to customized.
  * feat: support ELS31-V for Verizon.
  * feat: add SWITCH_SIM_FUNC to uc5100.conf.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Fri, 02 Mar 2018 11:30:18 +0800

moxa-cellular-utils (1.24.2) unstable; urgency=medium

  * fix: wrong condition operator.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 01 Feb 2018 13:15:03 +0800

moxa-cellular-utils (1.24.1) unstable; urgency=medium

  * fix: do not run hooks if not triggerred by `this`.
  * fix: initialize the module after update fw.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Wed, 31 Jan 2018 17:44:32 +0800

moxa-cellular-utils (1.24.0) unstable; urgency=medium

  * fix: adjust `set_profile` for Telit LE910C1.
  * feat: support YUGA CLM920 NC5.
  * feat: support carrier functions for Sierra MC7430.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Tue, 30 Jan 2018 11:35:16 +0800

moxa-cellular-utils (1.23.1) unstable; urgency=medium

  * Gemalto ELS61
    - fix: wrong return value.
    - fix: reattach before connection.
    - fix: stop while start failed.
  * fix: 2-cut HW design changed for UC5100 series.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 25 Jan 2018 16:34:09 +0800

moxa-cellular-utils (1.23.0) unstable; urgency=low

  * feat: provide cell_<op> to be customized.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Tue, 23 Jan 2018 15:45:14 +0800

moxa-cellular-utils (1.22.1) unstable; urgency=medium

  * docs: Update usage description.
  * fix: wrong deactive command for Gemalto ELS61.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Mon, 22 Jan 2018 15:06:17 +0800

moxa-cellular-utils (1.22.0) unstable; urgency=low

  * fix: update wwan node for PPP interface.
  * feat: support Telit LE910C1.
  * feat: support "reset" for `set_flight_mode`.
  * fix: adjust dialing procedure for Gemalto ELS61.
  * feat: add `ppp_start/stop` for Gemalto ELS61.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Fri, 12 Jan 2018 22:26:12 +0800

moxa-cellular-utils (1.21.0) unstable; urgency=low

  * fix: missing timeout option.
  * feat: support at port option for at command.
  * fix: add return code for `status`.
  * fix: show network information in status for QMI module.
  * feat: support Gemalto ELS61.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Fri, 05 Jan 2018 17:41:59 +0800

moxa-cellular-utils (1.20.3) unstable; urgency=low

  * feat: Support UC-5100 series.

 -- GaryWL Hsu <garywl.hsu@moxa.com>  Thu, 16 Nov 2017 10:58:52 +0800

moxa-cellular-utils (1.20.2) unstable; urgency=low

  * feat: Support AC-4300 series platforms.

 -- HarryYJ Jhou <harryyj.jhou@moxa.com>  Wed, 25 Oct 2017 14:51:50 +0800

moxa-cellular-utils (1.20.1) unstable; urgency=low

  * feat: Support UC-8112-ME-T-LX1 series platforms.

 -- GaryWL Hsu <garywl.hsu@moxa.com>  Fri, 20 Oct 2017 15:47:56 +0800

moxa-cellular-utils (1.20.0) unstable; urgency=low

  * fix: qmicli start network parameter can not be parsed by qmicli.
  * Add authorization mechanism in qmi start network function.

 -- GaryWL Hsu <garywl.hsu@moxa.com>  Thu, 03 Aug 2017 16:35:37 +0800

moxa-cellular-utils (1.19.7) unstable; urgency=low

  * fix: fix signal led not turn off after module power off issue
  * fix: set MAX_SLOT_NUM depends on product setting
  * fix: use bash

 -- Donald Hsu <donald.hsu@moxa.com>  Tue, 11 Jul 2017 16:41:37 +0800

moxa-cellular-utils (1.19.6) unstable; urgency=low

  * fix: no supported module on all slots then return error code 5
  * fix: no supported module on specific slot then return error code 6

 -- Donald Hsu <donald.hsu@moxa.com>  Thu, 22 Jun 2017 16:17:10 +0800

moxa-cellular-utils (1.19.5) unstable; urgency=low

  * fix: some command dose not release global lock.

 -- GaryWL Hsu <garywl.hsu@moxa.com>  Fri, 16 Jun 2017 10:27:10 +0800

moxa-cellular-utils (1.19.4) unstable; urgency=low

  * fix: deadlock occur when execute command that need global lock.
  * fix: Use `mxat` to execute AT command.

 -- GaryWL Hsu <garywl.hsu@moxa.com>  Wed, 14 Jun 2017 17:08:10 +0800

moxa-cellular-utils (1.19.3) unstable; urgency=low

  * fix: `switch_sim` shouldn't work for invalid id

 -- Donald Hsu <donald.hsu@moxa.com>  Wed, 31 May 2017 11:32:10 +0800

moxa-cellular-utils (1.19.2) unstable; urgency=low

  * feat: Support MRC-1002-T series platforms.

 -- Wes huang <wes.huang@moxa.com>  Fri, 19 May 2017 11:50:51 +0800

moxa-cellular-utils (1.19.1) unstable; urgency=low

  * fix: Modify model name of MC-1100 series.
  * fix: Wrong slot number of WCUM-8500.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Sat, 13 May 2017 21:38:56 +0800

moxa-cellular-utils (1.19.0) unstable; urgency=low

  * feat: Remove `cell_mgmt number`.
  * feat: Add `imsi` support.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 13 Apr 2017 14:00:34 +0800

moxa-cellular-utils (1.18.0) unstable; urgency=low

  * refactor: Adjust lock mechanism.
  * fix: Correct return code.
  * feat: Adjust `pin_protection` and add at version.
  * fix: Check if AT port locked when timeout occurs.
  * fix: Decrease waiting timeout to 10 seconds.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Wed, 29 Mar 2017 15:27:27 +0800

moxa-cellular-utils (1.17.7) unstable; urgency=low

  * fix: Status in `at` mode should using "slot" id.
  * fix: Empty row is appended for "Unknown" operator.
  * fix: Wrong `PPPIFNAME` when connected.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Wed, 29 Mar 2017 14:20:05 +0800

moxa-cellular-utils (1.17.6) unstable; urgency=low

  * fix: Use "dbm2csq` by default on QMI device.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Mon, 20 Mar 2017 12:25:41 +0800

moxa-cellular-utils (1.17.5) unstable; urgency=low

  * fix: Adjust default timeout by different command.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Sun, 19 Mar 2017 15:35:36 +0800

moxa-cellular-utils (1.17.4) unstable; urgency=low

  * fix: Re-initialized if never initialized.
  * fix: Use "slot" index instead of "interface" index.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Fri, 17 Mar 2017 19:04:29 +0800

moxa-cellular-utils (1.17.3) unstable; urgency=low

  * fix: Add `gawk` in dependency.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 16 Mar 2017 22:46:58 +0800

moxa-cellular-utils (1.17.2) unstable; urgency=low

  * fix: Remove extra "ATE0" from initialization.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 16 Mar 2017 18:34:20 +0800

moxa-cellular-utils (1.17.1) unstable; urgency=low

  * fix: Use `_exit` to unlock `flock`.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 16 Mar 2017 13:43:17 +0800

moxa-cellular-utils (1.17.0) unstable; urgency=low

  * feat: Support `check/switch_carrier` for MC7455.
  * fix: Set default value to slot number.
  * fix: Re-initialize after `power_on`.
  * fix: Only "SIM PIN" requires a PIN code.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Wed, 15 Mar 2017 21:33:22 +0800

moxa-cellular-utils (1.16.0) unstable; urgency=low

  * fix: No status file.
  * fix: Unlock PIN during connection.
  * feat: Add `switch_sim` to switch SIM slot.
  * fix: Get empty operator with AT command.
  * feat: Support YUGA CLM920_CN.
  * feat: Support network registration status (`attach_status`).
  * feat: Support `set_flight_mode` for both at & qmi.
  * fix: Huawei module cannot leave flight mode.
  * feat: Support `set_profile`.
  * fix: `unlock_pin` for QMI device hangs.
  * Using QMI to retrieve operator only for Sierra.
  * text: Adjust usages.
  * fix: Wrong function name for `gps_off`.
  * fix: Adjust error code and messages.
  * fix: "PIN" is required for `pin_protection`.
  * fix: Check `kversion` and `qmicli` before using.
  * fix: "99" instead of "-1" for signal CSQ.
  * fix: Update data format failed for qmi.
  * fix: Return option exit code.
  * fix: `grep` AT command may failed with "echo on".
  * fix: Separate state and lock file by interface.
  * fix: Wait module back for Huawei after leave flight mode.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Wed, 08 Mar 2017 15:03:02 +0800

moxa-cellular-utils (1.15.1) unstable; urgency=low

  * fix: Scan by interface number not slot number.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 02 Mar 2017 13:15:41 +0800

moxa-cellular-utils (1.15.0) unstable; urgency=low

  * refactor: Separate configs of modules & products and module specific
    operations.
  * feat: Add `initialize` to initialize the module.
  * feat: Add module, ids, and location info.
  * feat: Initialize all modules at system boot and after `power_on`.
  * fix: Adjust `m_info` based on new arch. and cmd.
  * fix: Check AT port before send command.
  * feat: Support connection via wvdial & ppp.
  * fix: Use pid file to kill dhclient.
  * feat: Support `get_profiles` to get PDP list.
  * feat: Add `status` for AT connection.
  * feat: Support `Phone` in config. (for AT based modules).
  * feat: Add `post_start` to execute after start.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Wed, 01 Mar 2017 22:37:32 +0800

moxa-cellular-utils (1.12.1) unstable; urgency=low

  * fix: restart failed at "start".

 -- Aeluin Chen <aeluin.chen@moxa.com>  Wed, 15 Feb 2017 21:38:14 +0800

moxa-cellular-utils (1.12.0) unstable; urgency=low

  * feat: Add `cell-signald` to light signal LED(s).

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 09 Feb 2017 17:49:52 +0800

moxa-cellular-utils (1.11.0) unstable; urgency=low

  * Feat: Support dynamic module identifier.
  * Feat: Support "slot" to power on/off correctly.
  * Feat: Get slot id.
  * Fix: Add libqmi-proxy dependency.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Tue, 07 Feb 2017 17:57:20 +0800

moxa-cellular-utils (1.10.5) unstable; urgency=medium

  * Fix: Because already added _connect_error_note function, removed set_apn warning message.

 -- Wes Huang <wes.huang@moxa.com>  Thu, 02 Feb 2017 16:35:37 +0800

moxa-cellular-utils (1.10.4) unstable; urgency=medium

  * Fix: Modified uc8100 usb related config for kernel 4.1

 -- Wes Huang <wes.huang@moxa.com>  Thu, 02 Feb 2017 10:51:41 +0800

moxa-cellular-utils (1.10.3) unstable; urgency=low

  * Fix: Support multiple modules.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Wed, 25 Jan 2017 16:50:39 +0800

moxa-cellular-utils (1.10.2) unstable; urgency=low

  * Fix: Wrong package name caused remove package failed.
  * Text: Add error notice after connection failed.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Wed, 25 Jan 2017 14:48:45 +0800

moxa-cellular-utils (1.10.1) unstable; urgency=low

  * Text: Add notes before start connection.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 19 Jan 2017 18:01:19 +0800

moxa-cellular-utils (1.10.0) unstable; urgency=low

  * Fix: Avoid AT command separated by space.
  * Feat: support PIN retries remains.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Wed, 11 Jan 2017 17:01:12 +0800

moxa-cellular-utils (1.9.11) unstable; urgency=low

  * Feat: Support UC-8580 with 1 module.
  * Fix: `check_carrier` and `switch_carrier` used deprecated command,
    and is not workable with latest MC7354 firmware.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 29 Dec 2016 19:46:13 +0800

moxa-cellular-utils (1.9.10) unstable; urgency=low

  * Fix: Version of libqmi should >= 1.16.2.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 01 Dec 2016 13:36:35 +0800

moxa-cellular-utils (1.9.9) unstable; urgency=low

  * Fix: Work with libqmi-1.16.2.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 01 Dec 2016 13:04:38 +0800

moxa-cellular-utils (1.9.8) unstable; urgency=low

  * Fix: Unexpected output of AT command.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Sun, 06 Nov 2016 11:30:05 +0800

moxa-cellular-utils (1.9.7) unstable; urgency=medium

  * Support MXcore01, VCG-1021-T, UC-8112-ME-T-LX C1D2 platforms.

 -- Wes Huang <wes.huang@moxa.com>  Fri, 04 Nov 2016 11:50:01 +0800

moxa-cellular-utils (1.9.6) unstable; urgency=low

  * Feature: Use `unlock_pin` instead of `set_pin`.
  * Feature: Support SIM number.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 30 Sep 2016 18:09:18 +0800

moxa-cellular-utils (1.9.5) unstable; urgency=low

  * Feature: Support Telit on MC-1100

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 22 Sep 2016 11:48:30 +0800

moxa-cellular-utils (1.9.4) unstable; urgency=low

  * Feature: Add `force` arg for not using lock
  * Feature: Support `LCID`.
  * Fix: Use `base station ID` instead of `cell ID` and `network ID` instead
    of `LAC`.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 01 Sep 2016 11:53:48 +0800

moxa-cellular-utils (1.9.3) unstable; urgency=low

  * Fix: wrong profile location assigned.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Mon, 25 Jul 2016 18:24:00 +0800

moxa-cellular-utils (1.9.2) unstable; urgency=low

  * Fix: do not execute `qmi-proxy`, blocking issue may occurred.
    `qmicli` will spawn it if necessary.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Fri, 22 Jul 2016 10:28:27 +0800

moxa-cellular-utils (1.9.1) unstable; urgency=low

  * Fix: interface should be `up` before calling `udhcpc`.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 21 Jul 2016 18:35:23 +0800

moxa-cellular-utils (1.9.0-1) unstable; urgency=low

  * Remove libqmi-1.12.6 binaries (dependency added).
  * Add diversion for udhcpc default script.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Fri, 15 Jul 2016 09:29:06 +0800

moxa-cellular-utils (1.9.0) unstable; urgency=low

  * Support Sierra Wireless MC7455.
  * Depends on `libqmi-1.14.2` and `udhcpc`.

 -- Aeluin Chen <aeluin.chen@moxa.com>  Thu, 14 Jul 2016 18:10:54 +0800

moxa-cellular-utils (1.8.0) unstable; urgency=low

  * Match with real version.
  * Power cycle module when qmi port seems crash.
  * Remove help and warning color.
  * Provide set_apn for updating APN.
  * Support Verizon private network auto dialing (vzwauto).

 -- Aeluin Chen <aeluin.chen@moxa.com>  Mon, 20 Jun 2016 13:25:04 +0800

moxa-cellular-utils (1.0.1) unstable; urgency=low

  * Add "QMI_port" to "cell_mgmt m_info" output.

 -- Harry Jhou <HarryYJ.Jhou@moxa.com>  Tue, 12 Jan 2016 09:03:05 +0800

moxa-cellular-utils (1.0.0) unstable; urgency=low

  * Initial Release.

 -- Wes Huang <Wes.Huang@moxa.com>  Thu, 10 Dec 2015 17:58:30 +0800
