Skip to main content

mx-led-ctl

Moxa LED Controll​

mx-led-ctl is a common script for controlling LED's interface mode

Download

Support Model​

Prerequisite​

Before use mx-led-ctl script, you should install drivers as below.

  1. moxa-it87-gpio-driver

Usage​

mx-led-ctl -i <led_index> [on|off]

  • Get state from index 1

    mx-led-ctl -i 1

  • Set index 1 to on

    mx-led-ctl -i 1 on

Model IO Table​

DA-820C​

  • 8 programmable LEDs on the front panel

    LED Index
    1
    2
    3
    4
    5
    6
    7
    8

DA-682C​

  • 8 programmable LEDs on the front panel

    LED Index
    1
    2
    3
    4
    5
    6
    7
    8

DA-681C​

  • 8 programmable LEDs on the front panel

    LED Index
    1
    2
    3
    4
    5
    6
    7
    8

DA-680​

  • 8 programmable LEDs on the front panel

    LED Index
    1
    2
    3
    4
    5
    6
    7
    8

Last updated on 2023-02-15 by Wilson Huang