Skip to main content

mx-m2b-module-ctl

Moxa M.2 B Key Module Control​

mx-m2b-module-ctl is a common script for controlling M.2 B key module.

Download

Support Model​

Prerequisite​

Before use mx-m2b-module-ctl script, you should install drivers as below.

  1. moxa-gpio-pca953x-driver

Usage​

Usage:
       mx-m2b-module-ctl [Options]

Operations:
       -s, --slot <module_slot_id>
               Select module slot
       -p, --pwren [high|low]
               Get/Set power enable pin high/low status
       -t, --turnon [high|low]
               Get/Set turn-high pin high/low status
       -r, --reset [high|low]
               Get/Set reset pin high/low status
       -a, --airplane [high|low]
               Get/Set airplane pin high/low status
       -i, --sim 1|2
               Get/Set sim card slot 1/2
       -m, --mod_status 1|2
               Get module and config status

Example:
       Set power enable to [high] status for module 1
       # mx-m2b-module-ctl -s 1 -p high
       Get power enable pin status of module 1
       # mx-m2b-module-ctl -s 1 -p

       Set turn-on pin to [high] status for module 1
       # mx-m2b-module-ctl -s 1 -t high
       Get turn-on pin status of module 1
       # mx-m2b-module-ctl -s 1 -t

       Set reset pin to [low] status for module 2
       # mx-m2b-module-ctl -s 2 -r low
       Get reset pin status of module 2
       # mx-m2b-module-ctl -s 2 -r

       Set airplane pin to [low] status for module 2
       # mx-m2b-module-ctl -s 2 -a low
       Get airplane pin status of module 2
       # mx-m2b-module-ctl -s 2 -a

       Select SIM slot 2 for module 2
       # mx-m2b-module-ctl -s 2 -i 2
       Get current SIM slot of module 2
       # mx-m2b-module-ctl -s 2 -i

       Get module 2 status
       # mx-m2b-module-ctl -s 2 -m

  • Pull power enable high on module 1

    mx-m2b-module-ctl -s 1 -p on

  • Set module 1 reset pin to high

    mx-m2b-module-ctl -s 1 -r high

  • Set module 2 turn-on pin to high

    mx-m2b-module-ctl -s 2 -t high

  • Set module 2 airplane pin to high

    mx-m2b-module-ctl -s 2 -a high

  • Select SIM 2 for module 1

    mx-m2b-module-ctl -s 1 -i 2

  • Get power status of module 1

    mx-m2b-module-ctl -s 1 -p

  • Get current SIM slot of module 1

    mx-m2b-module-ctl -s 1 -i

Model IO Table​

V3000​

  • Power Control

    Slot ID
    #1
    #2

  • Sim card slots

    Sim Slot ID
    #1
    #2

Last updated on 2022-07-27 by Elvis Yao