Skip to main content

mx-module-ctl

Moxa Module Control​

mx-module-ctl is a common script for controlling Module.

Download

Support Model​

Prerequisite​

Before use mx-module-ctl script, you should install drivers as below.

  1. moxa-it87-gpio-driver

For V3000 series model, only to use pca953x driver to control module:

  1. moxa-gpio-pca953x-driver

Usage​

Usage:
       mx-module-ctl [Options]

Operations:
       -s, --slot <module_slot_id>
               Select module slot
       -p, --power [on|off]
               Get/Set power on/off module
       -r, --reset [on|off]
               Get/Set reset pin to high(on)/low(off) to slot
       -i, --sim 1|2
               Get/Set sim card slot

Example:
       Power on module 1
       # mx-module-ctl -s 1 -p on

       Set module 2 reset pin to high
       # mx-module-ctl -s 2 -r on

       Select SIM 2 for module 1
       # mx-module-ctl -s 1 -i 2

       Get power status of module 1
       # mx-module-ctl -s 1 -p

       Get current SIM slot of module 1
       # mx-module-ctl -s 1 -i
  • Power on module 1
    mx-module-ctl -s 1 -p on
  • Set module 2 reset pin to high
    mx-module-ctl -s 2 -r on
  • Select SIM 2 for module 1
    mx-module-ctl -s 1 -i 2
  • Get power status of module 1
    mx-module-ctl -s 1 -p
  • Get current SIM slot of module 1
    mx-module-ctl -s 1 -i

Model IO Table​

V2403C​

  • mPCIe Power Control

    Slot ID
    #1
    #2

  • Sim card slot in the front panel

    Sim Slot ID
    #1
    #2

V2403C​

  • mPCIe Power Control

    Slot ID
    #1
    #2

  • Sim card slot in the front panel

    Sim Slot ID
    #1
    #2

V2403C​

  • mPCIe Power Control

    Slot ID
    #1

V3000​

  • mPCIe Power Control

    Slot ID
    #1

  • Sim card slots

    Sim Slot ID
    #1

Last updated on 2022-07-27 by Elvis Yao