Skip to main content

mx-expc-led-ctl

Moxa EXPC LED Controll​

mx-expc-led-ctl is a common script for controlling LED's interface mode on EXPC-F2000 series

Download

Support Model​

Prerequisite​

Before use mx-expc-led-ctl script, you should install drivers as below.

  1. moxa-it87-gpio-driver
  2. Install efivar package: apt update && apt install efivar -y

Usage​

Usage:
        mx-expc-led-ctl -i <led_index> [LAN1|LAN2|LAN3|LAN4|UART1_TX|UART2_TX|UART3_TX|UART1_RX|UART2_RX|UART3_RX]

OPTIONS:
        -i <led_index>
                Set LED index.

Example:
        Get mode from index 0
        # mx-expc-led-ctl -i 0

        Set LED index 0 to LAN1 mode
        # mx-expc-led-ctl -i 0 LAN1

        Set LED index 1 to UART3_TX mode
        # mx-expc-led-ctl -i 1 UART3_TX

Model IO Table​

EXPC-F2000​

  • 2 programmable LEDs on the display panel

Last updated on 2022-06-30 by Elvis Yao